EFT-285

7100P-330 Combustion Blower

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7350P-021 Spark Electrode

The Boiler Spark Ignitor generates the electric spark that begins combustion within many HTP boilers. Includes 7250P-005 gasket.

7350P-129 3.15A Fuse

The 3.15 Amp Control Board Fuse is a slow-blow fuse in the field connection board that is designed to protect the product's electronics in some cases.

7600P-105 Burner Gasket

HTP 7600P-105 GASKET BURNER EFT-155, 199, 285

7600P-110 Ceramic Refractory Door

Ceramic Door Refractory protects the burner door from the heat produced during combustion. 

7600P-114 Burner Tube

Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited.

7600P-005 Display Assembly

Display assembly allows your to view appliance performance and service menus.

7600P-087 Flame Rectification Probe

The Flame Rectification Probe is used to sense the presence of combustion within the chamber of the boiler.

7600P-112 Burner Door Gasket

EFT Burner door gasket, used to seal the burner door to the combustion chamber.

7600P-006 Condensate Trap Assembly

Condensate Assembly collects the condensate produced during combustion and redirects it out of the appliance with a safety to stop the appliance if the condensate line is blocked.

7600P-007 Water Pressure Switch

The water pressure switch is to help insure that there is sufficient water in the boiler when it is running. It should prevent the boiler from firing if it does not detect enough water.

7600P-502 Pressure Switch

There are two of these pressure switches on the EFT, one is to ensure the vent remains clear and the other to ensure that the condensate does not back up.