ModCon

7350P-023 Flame Probe

The flame rectification probe is used to sense the presence of combustion within the chamber of the boiler.

7350P-021 Spark Electrode

The Boiler Spark Ignitor generates the electric spark that begins combustion within many HTP boilers. Includes 7250P-005 gasket.

7350P-089 Low Water Cut Off

This probe is used to ensure there is enough water in the tank / system for safe operation.

7350P-129 3.15A Fuse

The 3.15 Amp Control Board Fuse is a slow-blow fuse in the field connection board that is designed to protect the product's electronics in some cases.

7350P-018 Burner Door Refractory

This Refractory piece protects the burner door from the heat produced during combustion. 

7250P-162 Ceramic Target Wall

The Ceramic Target Wall is a protective disk made up of ceramic fibers. It should always be in place when a boiler is being used, as it protects the back wall of the heat exchanger.

7350P-038 Combustion Blower MODCON 850/1700

New Combution blower for MODCON units from 850-1700. The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7350P-601 Low Water Cut off Kit for ModCon

Low water cut off sensors are designed to prevent the boiler from firing without sufficient water.

7250P-580 Gas Valve Relay Board

Gas Valve relay board converts the AC Electrical signal from the control to DC for the gas valve.

7350P-022 Flame Rectification Probe

The Flame Rectification Probe is used to sense the presence of combustion within the chamber of the boiler.

7250P-739 Thermodisc Eco Flue Switch- 160

The flue high temperature switch is a safety that will shut down the appliance if the flue temperature is too high.

7350P-070 Field Connection Board

Field Electrical Connection Board for HTP boilers, The customer connection board allows power connections for the Elite, ModCon, and Pioneer;Versa Flame space heating appliances.