T50

7250P-003 / 91442 Gasket Test

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-460 / 91497 Condensate Hose Replacement

This is the replacement for a condensate hose assembly for a T50 and T80. This allows for the condensate to drain from the unit to a pump and or drain.

7500P-091 / 91592 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-085 / 91423 T50, T80, 80M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7350P-008 / 7450P-122 / 7450P-926, 926 Control Board

This programmable control board can be used to operate most HTP products. Make sure to select the correct Model and Revision to ensure the correct program is downloaded to the control board.   *UPDATED PART NUMBER...

7350P-009 Munchkin 926 Display Board

This programmable control display can be used to operate most HTP products. Model and serial number must be provided for boards to be accurately programmed.

7500P-109 Washer M4 For Ceramic Target Wall

 Washer M4 For Ceramic Target Wall

7500P-067 Nut M6 for Burner Door

 Nut M6 for Burner Door.

7500P-094 O-Ring

 Gas Valve Adapter O-Ring.

7250P-653 / 91476 Munchkin Spark Cable

Spark cable.