Peerless Pinnacle

7250P-003 / 91442 Gasket Test

7250P-035 Honeywell Venturi

This Venturi is used on the Honeywell Gas valves.

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-249 / 91408 140 Burner tube and Gasket

This allows for the replacement of the burner tube and gasket on a Munchkin 140,000 BTU boiler. Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited and burns as an even flame. Includes replacement gasket.

7250P-460 / 91497 Condensate Hose Replacement

This is the replacement for a condensate hose assembly for a T50 and T80. This allows for the condensate to drain from the unit to a pump and or drain.

7500P-091 / 91592 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-250 / 91409 NIT Burner Tube 199M with Gasket

Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited and burns as an even flame. Includes replacement gasket.

7250P-087 / 91425 Munchkin 199M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler. Includes 7250P-226 cork gasket.

7250P-086 / 91424 140M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler. Includes 7250P-226 cork gasket.

7250P-085 / 91423 T50, T80, 80M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7350P-159 Munchkin Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.