Product Description
Spyder's Rapid Core Eject arbor system to remove cores without prying - drill hole, press button, pull back the hole saw, and eject the core - up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject arbor system.
-
Spyder Hex8 pilot bit - 3/8-in hex, 1/4-in TCT drill bitect hole saws
-
Spyder's Rapid Core Eject arbor removes cores without prying, cuts at an angle, and enlarges existing holes
-
TCT (tungsten carbide tipped) pilot bit drills cement block, brick and other masonry materials
-
Spin on, spin off saw mounting
-
2-7/8-In drilling depth
-
Always drill using a drill motor that is equipped with a support handle
-
For us in standard rotary drilling mode - not for use in hammer or impacting drill modes
