Rev 1

7250P-037 Honeywell Venturi

The Honeywell Venturi is attached to the Honeywell gas valve. This allows the gas to be pulled by the negative air pressure and mixed before being forced into the air channel.

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-250 / 91409 NIT Burner Tube 199M with Gasket

Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited and burns as an even flame. Includes replacement gasket.

7250P-087 / 91425 Munchkin 199M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler. Includes 7250P-226 cork gasket.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7350P-008 / 7450P-122 / 7450P-926, 926 Control Board

This programmable control board can be used to operate most HTP products. Make sure to select the correct Model and Revision to ensure the correct program is downloaded to the control board.   *UPDATED PART NUMBER...

7500P-067 Nut M6 for Burner Door

 Nut M6 for Burner Door.

7500P-094 O-Ring

 Gas Valve Adapter O-Ring.

7500P-093 / 91543 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-653 / 91476 Munchkin Spark Cable

Spark cable.

7250P-644 / 91545 Adapter Plate

The Dungs Gas Valve to Blower Mounting Kit is used to connect a gas valve to a blower motor inside many HTP products.

7250P-452 / 91540 Dungs Gas Valve

Gas valve that controls the amount of incoming fuel into the appliance.