Rev1

7250P-003 / 91442 Gasket Test

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-460 / 91497 Condensate Hose Replacement

This is the replacement for a condensate hose assembly for a T50 and T80. This allows for the condensate to drain from the unit to a pump and or drain.

7500P-091 / 91592 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-085 / 91423 T50, T80, 80M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7350P-008 / 7450P-122 / 7450P-926, 926 Control Board

This programmable control board can be used to operate most HTP products. Make sure to select the correct Model and Revision to ensure the correct program is downloaded to the control board.   *UPDATED PART NUMBER...

7500P-067 Nut M6 for Burner Door

 Nut M6 for Burner Door.

7500P-094 O-Ring

 Gas Valve Adapter O-Ring.

7250P-653 / 91476 Munchkin Spark Cable

Spark cable.

7250P-644 / 91545 Adapter Plate

The Dungs Gas Valve to Blower Mounting Kit is used to connect a gas valve to a blower motor inside many HTP products.

7250P-139 Munchkin Vision 2 Mixed Zone Package

Belimo 1" Modulating Vision 2