Rev1

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-249 / 91408 140 Burner tube and Gasket

This allows for the replacement of the burner tube and gasket on a Munchkin 140,000 BTU boiler. Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited and burns as an even flame. Includes replacement gasket.

7250P-086 / 91424 140M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler. Includes 7250P-226 cork gasket.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7500P-067 Nut M6 for Burner Door

 Nut M6 for Burner Door.

7500P-093 / 91543 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-653 / 91476 Munchkin Spark Cable

Spark cable.

7250P-644 / 91545 Adapter Plate

The Dungs Gas Valve to Blower Mounting Kit is used to connect a gas valve to a blower motor inside many HTP products.

7250p-451 / 91539 Dungs Gas Valve

Replacement for a Munchkin 140,000 BTU Dungs gas valve.

7250P-038 / 91426 Gas Valve

A replacement gas valve for certain model Munchkin high efficiency boilers.

7250P-724 / 19531 Condensate Hose Assembly

The Munchkin Condensate Hose Kit is a replacement part of condensate hoses from 80M / 140M / 199M / 399M floor standing Munchkins. This will not work on Munchkin T50M or T80M.

7250P-391 / 91462 Wiring Harness Low Voltage 10 pin / 20 pin

Wiring Harness Low Voltage 10 pin / 20 pin.