PI-T80

7250P-003 / 91442 Gasket Test

7250P-204 Munchkin Burner Door Screw

 Munchkin Burner Door Screw, to attach the burner tube to the burner door for Rev1 only.

7250P-460 / 91497 Condensate Hose Replacement

This is the replacement for a condensate hose assembly for a T50 and T80. This allows for the condensate to drain from the unit to a pump and or drain.

7250P-085 / 91423 T50, T80, 80M Blower Motor

The Combustion Blower Motor draws in fresh air and pushes the combustion mixture into the chamber and the exhaust out of the boiler.

7250P-005 / 91491Spark Igniter & Flame Rod Gasket

This is a gasket used on many HTP products to seal the spark ignitor and flame rod to the burner door.

7350P-020 Munchkin Spark Electrode

The Boiler Spark Ignitor generates the electric spark that begins combustion within many HTP boilers. Includes 7250P-005 gasket.

7500P-067 Nut M6 for Burner Door

 Nut M6 for Burner Door.

7500P-092 / 91542 Swirl Plate

This swirl plate is used in Munchkin boilers to control the flow of incoming air to improve combustion.

7250P-653 / 91476 Munchkin Spark Cable

Spark cable.

7250P-644 / 91545 Adapter Plate

The Dungs Gas Valve to Blower Mounting Kit is used to connect a gas valve to a blower motor inside many HTP products.

7250P-449 / 91479 Dungs Gas Valve

Gas valve that controls the amount of incoming fuel into the appliance.

7250P-248 / 91407 Nit Burner Tube T80/80 with Gasket

Burner tube allows the fuel/air mixture to enter the combustion chamber where it is ignited and burns as an even flame. Includes replacement gasket.